# Will It Fit the Lift? A Delivery-Day Checklist for 3-Bedroom Condo Homes

**By Joy David** · 2026-06-09

![MegaFurniture mattress in a cosy Singapore bedroom with a cat nearby and bedding arranged for a practical home setup.](https://cdn.shopify.com/s/files/1/1805/8667/files/megafurniture-mattress-fit-lift-singapore-bedroom.jpg?v=1780980134)

Here is the honest answer to the question you are quietly worrying about: the lift is rarely the problem. For most condo furniture deliveries that go wrong, the culprit is the 90-degree corridor turn between the lift lobby and the unit door, or the bedroom doorframe that is slightly narrower than the wardrobe you ordered. The lift itself is usually generous enough. The path after it is where deliveries stall.

This checklist is built for 3-bedroom condo homes specifically, because they combine large furniture such as King beds, 3-seater sofas, and full-height wardrobes with the corridor geometry and strata building rules that can make a straightforward delivery complicated. Work through it before you order, the day before, and on delivery morning, and you will have done everything within your power to make the day smooth.

> Measure the lift car interior and door opening, the corridor turn radius from the lift lobby to your front door, the main door leaf, and every internal doorframe the furniture must pass through. Do this before you confirm any large order. Most condo lift door openings are around 0.8 m, but the corridor turn is the tighter constraint for anything over about 1.8 m long.

## Stage 1: Before You Order: The Measurements That Actually Matter

### Measure the lift, but also the turn

Pull out a tape measure before you even browse. A King bed frame sits at 182 cm wide plus roughly 10 to 15 cm for the frame surround, meaning the assembled piece is close to 2 metres across. That width will need to travel from the loading bay through the lift, pivot around the lobby corridor, and pass through your bedroom door. The lift door opening in many condos is around 0.8 m, which means large items go in on their side or at an angle. What catches buyers out is the distance between the lift lobby wall and the opposite corridor wall at the first corner. If that clearance is under about 1.8 m, your delivery team will need to tilt, carry over-shoulder, or in some cases disassemble. Ask about disassembly and reassembly before you order, not after.

### Check every doorframe on the route

A typical internal bedroom door is around 0.8 m wide. A wardrobe panel is commonly 58 to 60 cm deep. Those two numbers are not the issue. The issue is that a full-height wardrobe arrives as a carcass that is typically 200 cm tall or more, and the delivery team needs to angle it through the doorframe to stand it upright inside the room. Height matters here as much as width. Measure your bedroom door height, not just its width.

### Confirm the sofa's actual footprint, not just its seat width

A 3-seat fabric sofa runs roughly 190 to 230 cm wide, but the figure you need for the lift test is the diagonal dimension when the sofa is tilted on its side. Most experienced delivery teams know the geometry, but you should know it too. Ask your retailer for the diagonal measurement of any sofa over 200 cm, and compare it to the usable diagonal space inside the lift car. For [living room furniture](/collections/living-room-furniture) like an L-shape sofa with a chaise, the chaise section, which is typically 150 to 165 cm, sometimes needs to come in as a separate piece. Confirm whether the sofa you are ordering is one unit or modular before delivery day.

### Check your condo's building management rules

Many condos require advance booking of the service lift, restrict delivery hours, often to weekday mornings, and charge a refundable deposit for lift pad protection. Some buildings will not allow teams to use the passenger lift at all. Call or email your building management office at least a week before your delivery date. Get the booking confirmed in writing. This is the step most first-time condo furniture buyers skip, and it is the one that causes reschedules.

![MegaFurniture mattress in a warm Singapore family condo bedroom with clear walking space for delivery planning.](https://cdn.shopify.com/s/files/1/1805/8667/files/megafurniture-mattress-condo-delivery-checklist.jpg?v=1780980134)

## Stage 2: The Day Before Delivery

### Clear the route from front door to final room

Move anything in the hallway, living area, and bedroom that a delivery team would have to step around while carrying something heavy and awkward. The recommended main walkway clearance is 70 to 90 cm; you want more than that during delivery because the team is moving laterally. Shift hall tables, shoe cabinets, hanging shoe organisers, and any floor lamps. If an existing sofa or dining table is being replaced, arrange its removal before the new piece arrives, not simultaneously.

### Protect your floors and walls

Ask your delivery team in advance whether they bring floor protection. Many professional teams do, but "professional" means different things at different price points. Lay old towels, cardboard, or proper floor runners on your parquet or marble floors along the delivery path. Condo corridors with marble or homogeneous tile can show scuff marks from appliance trolleys. Inside the unit, the corners of walls at every turn are the most vulnerable. A strip of blue masking tape over foam padding costs almost nothing and prevents repainting.

### Confirm sizes one final time with your retailer

Call or message your retailer to confirm the item dimensions on your order match what you measured. Check that any assembly service is included and that the team arriving knows the layout you need. For [bedroom furniture](/collections/bedroom) like a bed frame and wardrobe arriving on the same day, clarify which is delivered first, because the wardrobe often needs to go in before the bed frame occupies the floor space in front of the window wall.

## Stage 3: Delivery Morning

### Be there, or have someone there who knows the floor plan

Do not send a helper who has never been inside the bedroom. The delivery team will ask where each piece goes, and a wrong placement decision made at 9am takes two adults another hour to correct. If you cannot be present, draw a simple floor plan with measurements on your phone and send it to whoever is there, and to the delivery team in advance.

### Book the service lift in the morning slot

Even if you confirmed a booking, go down to the management office or call the concierge when the delivery truck arrives. Building management sometimes double-books service lifts. Being the person standing at the service lift with the pads already in place is the fastest way to prevent a delay that costs you half a day.

### Inspect before the team leaves

Check every piece in good light before you sign off. Look at joints, fabric panels, and hardware. If you are inspecting a [dining table or chairs](/collections/dining-room), check that all legs are level and that there are no hairline cracks near the mortise joints from the delivery tilt. A small nick found before the team drives away is handled calmly; found two days later, it becomes a dispute. Note anything on the delivery order before signing.

## If You Only Do Three Things

1.  **Measure the corridor turn, not just the lift door.** This is the dimension that causes the most failed deliveries in condo homes, and it takes five minutes with a tape measure to eliminate the risk.
2.  **Book the service lift with building management at least one week out.** A late booking means you may get a time slot that does not match your delivery window, and rebooking a truck costs everyone time.
3.  **Confirm disassembly and reassembly options with your retailer before you order.** Some large pieces can be partly disassembled for transport and reassembled in the room at no extra charge. Knowing this before purchase changes what you feel comfortable ordering.

![MegaFurniture mattress in a compact Singapore bedroom with smart layout planning for a 3-bedroom condo home.](https://cdn.shopify.com/s/files/1/1805/8667/files/megafurniture-mattress-3-bedroom-condo-fit.jpg?v=1780980134)

## Frequently Asked Questions

### What is the typical lift door opening width in a Singapore condo, and is it wider than in an HDB?

Condo service lifts vary more than HDB lifts, but many have door openings in the 0.8 to 1.0 m range. HDB lift door openings are commonly around 0.8 m as well. The more useful comparison is the lift car depth, which affects how long an item can be without having to tilt it. For any piece over about 1.8 m, always measure the car interior, not just the door leaf.

### My sofa is modular. Does the checklist still apply?

Yes, and it is actually easier. Modular sofas come in individual sections, so the constraint shifts from "will the whole sofa fit the lift" to "will each section fit through the bedroom or living room doorframe without scratching the paint." Measure the widest individual section against your doorframe width. Most modular sections are well under 1 m wide, so they clear standard door openings without difficulty.

### What happens if a piece genuinely will not fit through the front door?

The most common solutions are: disassemble the piece where the design allows, bring it through a larger opening such as a balcony door, or return and exchange for a different size. A balcony route requires measuring that opening and may sometimes involve removing the door frame. Ask your retailer what their policy is before the truck arrives; having that conversation on delivery day under time pressure is not the best moment.

### Can I browse large furniture with the lift measurement in mind before visiting a showroom?

Yes. It helps to know your corridor turn radius and doorframe dimensions before you go in-store, so the team can confirm which configurations work for your specific route. Browsing [the full home furniture range](/collections/home-furniture) online first, shortlisting 2 to 3 pieces, and then bringing your measurements to the Joo Seng showroom is an efficient way to make the decision confidently.

### How much clearance should I leave around furniture once it is in a 3-bedroom condo room?

A good rule of thumb: leave at least 60 cm on the sides of a bed to move comfortably, and at least 70 cm at the foot. For a dining table, allow roughly 90 to 100 cm behind each chair so people can push back and circulate. These are not luxury allowances; they are the minimums for a room that feels liveable rather than cramped.

## One Last Thought Before Delivery Day

Most delivery-day problems trace back to a measurement that was not taken, a building management call that was not made, or a disassembly question that was not asked. All three are easy to handle with a week's notice. None of them are easy on the morning of. Work through this checklist in the week before your delivery date, keep the tape measure out, and the day itself becomes the straightforward part.

If you are still in the selection stage, the team at the Joo Seng Prestige showroom, located at 134 Joo Seng Road, Level 2, daily 11:30am to 9pm, can walk through the dimensions of any piece with you in person. Bring your corridor and doorframe measurements and they will tell you plainly what will and will not work for your home.

MegaFurniture is expanding what it designs and manufactures in-house in stages, with furniture including bed frames, sofas, and wardrobes produced and quality-checked under its own management at owned facilities, then delivered, assembled, and supported in Singapore. A growing share of the furniture range comes through that single chain of responsibility, with the programme expanding through 2028.

---

> Source: [Megafurniture](https://megafurniture.sg/blogs/articles/will-it-fit-the-lift-a-delivery-day-checklist-for-3-bedroom-condo-homes)