# What Size Wardrobe Fits a Jumbo Flat? A Measuring Guide

**By Leong San Chua** · 2026-06-17

![](https://cdn.shopify.com/s/files/1/1805/8667/files/jumbo-flat-wardrobe-measuring-guide_7dd48c31-1d8c-4104-9204-3136efa78592.png?v=1781667056)A jumbo flat typically runs between 110 and 130 square metres, which sounds like enough room to put a wardrobe wherever you please. Most jumbo flat owners, on closer inspection, discover that around half that floor area is already committed to structural walls, bay windows, aircon ledges, and the generous corridors that make a jumbo flat feel like a home rather than a storage unit. The usable, unobstructed wall you actually have for a wardrobe is almost always shorter than you assumed, often by 40 to 60 centimetres.

This guide walks through how to measure the three zones where wardrobes typically go in a jumbo flat: the master bedroom, the second and third bedrooms, and the hallway landing. It tells you which wardrobe type fits each zone, and gives you the numbers to check before anything gets delivered.

**Quick answer:** In a jumbo flat master bedroom, a freestanding wardrobe spanning 150 to 200 cm wide and 58 to 60 cm deep is the most common fit, placed on the wall opposite the bed. Always verify that the remaining walkway is at least 70 cm wide, and that an open-door wardrobe has enough swing clearance (around 50 to 60 cm) before the bed frame.

## What Makes a Jumbo Flat Different From a Standard 5-Room

HDB classifies executive flats and jumbo units separately from the standard 5-room, though both often appear on the same estate. Where a standard 5-room typically comes in around 110 square metres, an executive flat runs closer to 130 square metres, with the extra area usually expressed as a larger living-dining zone or a longer master bedroom. Some jumbo configurations include a maisonette layout with a bedroom on an upper level, which introduces stair clearance as an additional constraint.

That additional area is not one open rectangle. Older HDB blocks built from the late 1980s through the 1990s often have more load-bearing walls and internal columns than newer BTO stock. Bay windows are common in master bedrooms and second rooms. These features are fixed, you cannot move them, and any wardrobe placed near one needs to account for the protrusion, typically 20 to 30 cm, before you measure the available run of flat wall.

## Zone 1: The Master Bedroom

The master bedroom in a jumbo flat is usually large enough for a king-size bed (182 cm wide, approximately 190 to 198 cm long) plus a wardrobe on one of the longer walls. The constraint is the combination of the bed frame, the door swing, and the path to the en-suite bathroom if the room has one.

### How to Measure the Wardrobe Wall

Stand facing the wall where the wardrobe will sit. Measure the full wall length, then subtract any bay window protrusion, the width of any light switch or socket panel you need to keep accessible, and the clearance required beside the door frame (allow at least 15 cm between the wardrobe edge and the door frame so the door can open cleanly). What remains is your maximum wardrobe width.

Next, measure the depth available. A standard wardrobe body runs 58 to 60 cm deep. Lay a tape measure from the wall outward and check what sits across from it, typically the bed frame. A bed frame adds roughly 10 to 15 cm around the mattress, so a king bed takes up about 192 to 197 cm total width. You need at least 60 cm of clearance on each side of the bed to move comfortably; at the foot, allow 70 cm. Run the numbers for your specific room before finalising a wardrobe width.

### Open Door vs Sliding Door in a Master Bedroom

Swing doors on a wardrobe need 50 to 60 cm of clear floor space in front of them to open fully. In a large master bedroom, that is usually achievable. In a room where the wardrobe wall faces the foot of a king bed, the gap can disappear fast. If the foot-of-bed clearance measures 70 to 80 cm, sliding doors are the safer choice because they need no swing space at all. **[Sliding door wardrobes](https://megafurniture.sg/collections/sliding-door-wardrobe)** work well on longer walls and can span a continuous run without breaking the visual line of the room.

## Zone 2: The Second and Third Bedrooms

Jumbo flats typically have two additional bedrooms beyond the master. These rooms are smaller, often configured to fit a queen or super single bed (107 cm wide, 190 cm long) with a study desk. The wardrobe usually needs to share the longer wall with the door, the desk, or both.

### Typical Configurations

A queen bed (152 cm wide) in a secondary bedroom leaves the shorter walls for the wardrobe and the door. Measure the wall the door sits on: the usable wardrobe run is the total wall length minus the door-frame width (roughly 90 cm including the frame) minus the 15 cm clearance on each side. In a room with a 350 cm wall, this often leaves 220 to 230 cm for a wardrobe, enough for a two- or three-door unit.

If the second bedroom doubles as a study or guest room, a **[modular wardrobe](https://megafurniture.sg/collections/modular-wardrobe)** gives you the option to configure sections differently (hanging on one side, shelves and drawers on the other) without committing to a fixed layout permanently. This matters in a jumbo flat that changes function over time, such as a child's room that becomes a home office.

### Bay Windows in Secondary Rooms

If a bay window sits on the same wall as the intended wardrobe run, you have two choices: stop the wardrobe at the bay window edge, or bridge over it. Bridging requires a raised base section and custom depth at the bay section, which is usually a built-in carpentry job rather than a freestanding piece. Stopping short of the bay is simpler and allows the window seat area to stay open, which is useful storage in its own right. Measure the flat-wall section only when sizing a freestanding wardrobe.

## Zone 3: The Hallway Landing or Service Corridor

Some jumbo flat layouts include a wider-than-usual corridor between the bedrooms or near the utility room. This landing can accommodate a slim wardrobe or a tall storage cabinet, particularly useful for linen, cleaning equipment, or seasonal items that do not need to live in a bedroom.

The main walkway in any HDB home should stay at least 70 to 90 cm wide for comfortable passage. Measure the corridor width and subtract 60 cm for the wardrobe depth, what remains tells you if the corridor can absorb a unit at all. A corridor narrower than 130 cm after accounting for a 60 cm deep wardrobe is too tight for day-to-day comfort; a shallow storage cabinet (30 to 40 cm deep) is a better option there. **[Storage units](https://megafurniture.sg/collections/storage-unit)** in that depth range take up far less of the corridor while still giving you meaningful capacity.

## Choosing the Right Wardrobe Type for a Jumbo Flat

The floor area of a jumbo flat can tempt you into oversizing, and that is where buyers most often go wrong. A 300 cm wardrobe that fills a wall beautifully in the showroom can crowd the circulation path to the bathroom, leaving a bottleneck that the extra square metres of a jumbo flat are supposed to prevent. The room does not care how large the flat is; it only cares about what fits between the fixed points.

For walls over 200 cm, a sliding-door wardrobe maintains a clean line and avoids door-swing calculations. For walls under 180 cm where swing clearance is comfortable, **[open door wardrobes](https://megafurniture.sg/collections/open-door-wardrobe)** give full, unobstructed access to every section simultaneously, which most people find more practical than sliding panels.

Zone

Typical Usable Wall

Recommended Type

Depth Check

Master bedroom (king bed)

150 - 220 cm

Sliding door or open door

58-60 cm; check foot-of-bed gap

Second/third bedroom (queen bed)

120 - 220 cm

Modular or open door

58-60 cm; check door-swing clearance

Hallway landing

Varies

Slim storage unit / cabinet

30-40 cm; corridor must stay ≥70 cm clear

## Budget Allocation for Wardrobe Planning in a Jumbo Flat

A jumbo flat often needs storage solutions in two or three rooms simultaneously, which means budget decisions compound quickly. The practical approach is to allocate the largest wardrobe spend to the master bedroom, where the highest-use and heaviest contents live, and use mid-range modular units for secondary bedrooms. Hallway landing storage can be a lower-priority, later purchase once the primary zones are settled.

Resist the impulse to buy all three zones at once if it means stretching budget to the point where you compromise on quality in the master bedroom. A wardrobe in a Singapore bedroom lives in a climate where humidity runs between 70 and 85 percent most of the year; materials that handle moisture poorly, particularly low-density particleboard at the base, can swell and delaminate within a few years. Spending more on the unit you open twice a day is the allocation that pays off.

## Shopping Sequence: What to Do Before You Browse

Print or sketch a floor plan for each room with the bay window, door, and any aircon ledge marked. Measure the wall run in each zone (using the method in Zone 1 above). Note the ceiling height, standard HDB ceilings are typically around 260 cm, but some older jumbo units vary. Check the lift and corridor dimensions on your floor before the delivery date: HDB internal doors are approximately 0.8 m wide, and many HDB lift door openings are around the same width. A wardrobe that measures 200 cm wide will need to be assembled in the room, not carried in fully built.

Bring your measurements when you visit the showroom. The Megafurniture Prestige showroom at Joo Seng Road has floor models set up in room configurations, which makes it straightforward to test clearances physically before committing. Once you have your zone measurements confirmed, **[browse the full wardrobe range](https://megafurniture.sg/collections/wardrobes)** to compare door styles, internal configurations, and finishes across the price tiers.

## ![](https://cdn.shopify.com/s/files/1/1805/8667/files/wardrobe-measuring-guide.png?v=1781667057)Frequently Asked Questions

### Can I fit a wardrobe in a jumbo flat master bedroom with a king-size bed?

Yes, in most cases. A king mattress is 182 cm wide and around 190 to 198 cm long; add 10 to 15 cm for the bed frame. Place the wardrobe on the wall opposite or perpendicular to the bed head, verify that the foot-of-bed gap is at least 70 cm, and that the wardrobe depth of 58 to 60 cm leaves the required walkway. Most jumbo master bedrooms accommodate this comfortably.

### What wardrobe depth is standard, and does it affect how much room I have left?

Standard wardrobe depth is 58 to 60 cm. That is the figure to subtract from your wall-to-furniture clearance when checking whether a walkway stays usable. A main walkway needs at least 70 to 90 cm of clear space; bedroom side clearance should be at least 60 cm. Measure from the intended wardrobe face outward to the nearest obstruction, not from wall to wall.

### Sliding or swing doors for a jumbo flat secondary bedroom?

If the space in front of the wardrobe measures less than 60 cm after accounting for a bed or desk, choose sliding doors. If swing clearance is comfortable, open doors give full simultaneous access to the whole wardrobe, which most people find easier to use day to day. Sliding doors are also the better choice on longer wall runs above 200 cm where a seamless look matters.

### Do I need to worry about lift access for a large wardrobe in an HDB block?

Yes. Many HDB lift door openings are around 0.8 m wide, and corridor turns add another constraint. A wardrobe wider than roughly 80 cm in assembled form cannot travel upright in the lift. Delivery teams will carry panels, not a fully assembled unit, so confirm that the wardrobe you choose arrives flat-packed or in panel form and is assembled in the room. Ask the retailer to confirm the delivery method before ordering.

### Is a modular wardrobe worth it for a jumbo flat?

If any bedroom in the flat changes function over the next five to ten years (child's room to study, guest room to home office) a modular system is worth considering. You can reconfigure internal sections without buying a new unit. The trade-off is that a modular system often costs more at the outset than an equivalent freestanding wardrobe; weigh that against how likely a layout change actually is for your household.

## Getting the Right Wardrobe Into the Right Room

A jumbo flat gives you real options that most HDB households do not have. The master bedroom can take a full, generous wardrobe without compromise. Secondary bedrooms can have proper, appropriately sized storage instead of the cramped single-door unit that a smaller flat forces. The hallway landing, if wide enough, can absorb utility storage that would otherwise clutter a bedroom. None of this happens automatically from having a larger flat, it happens from measuring correctly, committing door type to clearance reality, and buying in the right sequence.

If you are ready to match wardrobe to room, start with your measurements in hand and **[explore the full wardrobe range at Megafurniture](https://megafurniture.sg/collections/wardrobes)**, where complimentary delivery and professional in-home assembly are included on qualifying orders. Or visit the Prestige showroom at 134 Joo Seng Road, Level 2, daily from 11:30 am, to see door types and configurations at full scale before you decide.

An expanding share of the cabinet and storage range is produced in Megafurniture's own factories in Batu Pahat and Foshan, inspected there before shipment, and assembled locally by the Singapore delivery team, a single line of responsibility from manufacturing to the inside of your wardrobe room, with no third-party manufacturer margin in between.

---

> Source: [Megafurniture](megafurniture.sg/blogs/articles/what-size-wardrobe-fits-a-jumbo-flat-a-measuring-guide)